NONTIS · PRODUCT CATALOGUE
NT-25GR 4P Type 1 Surge Protective Device
NT-25GR 4P type 1 surge protective device from NONTIS. Review full technical specifications, including Type 1 and Class I; enquire about configuration and quantity.
Classification according to EN 61643-11Type 1
Classification according to IEC 61643-11Class I
Maximum continuous operating voltage150V / 275V / 385V
Lightning impulse current (10/350μs)25kA
Nominal discharge current (8/20μs)25kA
Maximum discharge current (8/20μs)100kA
Voltage protection level≤2.0kV
TECHNICAL DATA
Full specifications
| Model | NT-25GR 150 4P | NT-25GR 275 4P | NT-25GR 385 4P | |
|---|---|---|---|---|
| Classification according to EN 61643-11 | Type 1 | Type 1 | Type 1 | |
| Classification according to IEC 61643-11 | Class I | Class I | Class I | |
| Maximum continuous operating voltage | Uc | 150V | 275V | 385V |
| Lightning impulse current (10/350μs) | Iimp | 25kA | 25kA | 25kA |
| Nominal discharge current (8/20μs) | In | 25kA | 25kA | 25kA |
| Maximum discharge current (8/20μs) | Imax | 100kA | 100kA | 100kA |
| Voltage protection level | Up | ≤2.0kV | ≤2.0kV | ≤2.0kV |
| Maximum backup fuse | 315A gG | 315A gG | 315A gG | |
| Response time | tA | ≤100ns | ≤100ns | ≤100ns |
| Operating temperature range | Tu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Operating status indication | LED | LED | LED | |
| Minimum conductor cross-section | 4mm² | 4mm² | 4mm² | |
| Maximum conductor cross-section | 35mm² | 35mm² | 35mm² | |
| Mounting | 35 mm standard DIN rail | 35 mm standard DIN rail | 35 mm standard DIN rail | |
| Housing material | Thermoplastic (flammability rating UL94-V0) | |||
| Degree of protection | IP20 | IP20 | IP20 | |
Dimensions & installation

Dimensions and units are shown as marked in the drawing.
PRODUCT SELECTION
Application
For AC power distribution systems, selected according to the stated SPD classification, operating voltage and configuration.
Specify the required voltage and configuration in your enquiry. Check the ratings for the selected model before installation.
Discuss your NT-25GR 4P requirements.
Send your required configuration, quantity and destination to our team.
sales@nontis.com
