NONTIS · PRODUCT CATALOGUE

NTBD-4L-180 Digital Signal Surge Protector

NTBD-4L-180 digital signal surge protector from NONTIS. Review full technical specifications, including IEC 61643-21 and TYPE2 P1; enquire about configuration and quantity.

Test standardIEC 61643-21
ClassificationTYPE2 P1
Rated operating voltage180V
Maximum continuous operating voltage180VDC / 127V AC
Nominal current0.75A
Total nominal discharge current C2 (8/20μs)20kA
Nominal discharge current per line C2 (8/20μs)10kA

TECHNICAL DATA

Full specifications

Model NTBD-4L-180
Test standard IEC 61643-21
Classification TYPE2 P1
Rated operating voltage Un 180V
Maximum continuous operating voltage Uc 180VDC / 127V AC
Nominal current IL 0.75A
Total nominal discharge current C2 (8/20μs) In 20kA
Nominal discharge current per line C2 (8/20μs) In 10kA
Voltage protection level[C2: line-line] Up ≤270V
Voltage protection level[C2: line-PG] Up ≤600V
Voltage protection level[ 1kV/ μs C3: line-line] Up ≤250V
Voltage protection level[ 1kV/ μs C3: line-PG] Up ≤550V
Series impedance per line 1.8 Ohm
Cut-off frequency[line-PG] fG 25.0 MHz
Capacitance[line-line] C ≤240 pF
Capacitance[line-PG] C ≤16 pF
Operating temperature range Tu -40℃-80℃
Mounting 35 mm standard DIN rail
Housing material PA 6.6
Degree of protection IP20

Dimensions & installation

NTBD-4L-180 dimensional drawing

Dimensions and units are shown as marked in the drawing.

PRODUCT SELECTION

Application

For signal and data lines matching the stated interface, operating voltage and transmission characteristics.

Specify the required voltage and configuration in your enquiry. Check the ratings for the selected model before installation.

Discuss your NTBD-4L-180 requirements.

Send your required configuration, quantity and destination to our team.

sales@nontis.com
WA

Tell us what
your circuit needs.

Your details are used to respond to this enquiry.