NONTIS · PRODUCT CATALOGUE
NT-40 110 DC Surge Protective Device
NT-40 110 dc surge protective device from NONTIS. Review full technical specifications, including Type 2 and Class II; enquire about configuration and quantity.
Classification according to EN 61643-31Type 2
Classification according to IEC 61643-31Class II
Maximum continuous operating voltage110VDC
Nominal discharge current (8/20μs)20kA
Maximum discharge current (8/20μs)40kA
Voltage protection level [(DC+/DC-)→PE]≤900V
Response time≤25ns
TECHNICAL DATA
Full specifications
| Model | NT-40 110 | |
|---|---|---|
| Classification according to EN 61643-31 | Type 2 | |
| Classification according to IEC 61643-31 | Class II | |
| Maximum continuous operating voltage | Uc | 110VDC |
| Nominal discharge current (8/20μs) | In | 20kA |
| Maximum discharge current (8/20μs) | Imax | 40kA |
| Voltage protection level [(DC+/DC-)→PE] | Up | ≤900V |
| Response time | tA | ≤25ns |
| Operating temperature range | Tu | -40℃-80℃ |
| Operating status indication | Green / red | |
| Minimum conductor cross-section | 4mm² | |
| Maximum conductor cross-section | 35mm² | |
| Mounting | 35 mm standard DIN rail | |
| Housing material | Thermoplastic (flammability rating UL94-V0) | |
| Degree of protection | IP20 |
Dimensions & installation

Dimensions and units are shown as marked in the drawing.
PRODUCT SELECTION
Application
For DC circuits matching the stated continuous operating voltage and discharge ratings.
Specify the required voltage and configuration in your enquiry. Check the ratings for the selected model before installation.
Discuss your NT-40 110 requirements.
Send your required configuration, quantity and destination to our team.
sales@nontis.com
