NONTIS · PRODUCT CATALOGUE
NT-20DP 2P Type 3 Surge Protective Device
NT-20DP 2P type 3 surge protective device from NONTIS. Review full technical specifications, including Type 3 and Class III; enquire about configuration and quantity.
Classification according to EN 61643-11Type 3
Classification according to IEC 61643-11Class III
Maximum continuous operating voltage275V
Nominal discharge current (8/20μs)10kA
Maximum discharge current (8/20μs)20kA
Combination wave10kV
Voltage protection level≤1.3kV
TECHNICAL DATA
Full specifications
| Model | NT-20DP 2P | |
|---|---|---|
| Classification according to EN 61643-11 | Type 3 | |
| Classification according to IEC 61643-11 | Class III | |
| Maximum continuous operating voltage | Uc | 275V |
| Nominal discharge current (8/20μs) | In | 10kA |
| Maximum discharge current (8/20μs) | Imax | 20kA |
| Combination wave | Uoc | 10kV |
| Voltage protection level | Up | ≤1.3kV |
| Response time | tA | ≤25ns |
| Operating temperature range | Tu | -40℃-80℃ |
| Operating status indication | Green / red | |
| Minimum conductor cross-section | 2.5mm² | |
| Maximum conductor cross-section | 16mm² | |
| Mounting | 35 mm standard DIN rail | |
| Housing material | Thermoplastic (flammability rating UL94-V0) | |
| Degree of protection | IP20 |
Dimensions & installation

Dimensions and units are shown as marked in the drawing.
PRODUCT SELECTION
Application
For AC power distribution systems, selected according to the stated SPD classification, operating voltage and configuration.
Specify the required voltage and configuration in your enquiry. Check the ratings for the selected model before installation.
Discuss your NT-20DP 2P requirements.
Send your required configuration, quantity and destination to our team.
sales@nontis.com
