NONTIS · PRODUCT CATALOGUE
NTRJ45L-4LR Ethernet Surge Protector
NTRJ45L-4LR ethernet surge protector from NONTIS. Review full technical specifications, including IEC 61643-21 and 5V; enquire about configuration and quantity.
Test standardIEC 61643-21
Rated operating voltage5V
Maximum continuous operating voltage6VDC / 4V AC
Nominal current0.5A
Lightning impulse current per line D1 (10/350μs)0.5kA
Nominal discharge current per line C2 (8/20μs)1.5kA
Voltage protection level[line-line] @200A≤30V
TECHNICAL DATA
Full specifications
| Model | NTRJ45L-4LR | |
|---|---|---|
| Test standard | IEC 61643-21 | |
| Rated operating voltage | Un | 5V |
| Maximum continuous operating voltage | Uc | 6VDC / 4V AC |
| Nominal current | IL | 0.5A |
| Lightning impulse current per line D1 (10/350μs) | Iimp | 0.5kA |
| Nominal discharge current per line C2 (8/20μs) | In | 1.5kA |
| Voltage protection level[line-line] @200A | Up | ≤30V |
| Voltage protection level[line-PG] @1.5kA | Up | ≤500V |
| Voltage protection level[line-line] at 1kV/ μs C3 | Up | ≤180V |
| Voltage protection level[line-PG] at 1kV/ μs C3 | Up | ≤500V |
| Response time[line-line] | tA | ≤1ns |
| Response time[line-PG] | tA | ≤100ns |
| Operating temperature range | Tu | -40℃-80℃ |
| Interface (input/output) | 24 RJ45 ports | |
| Bandwidth | 30 Mbps | |
| Insertion loss | ≤0.3dB | |
| Housing material | Aluminium alloy | |
| Degree of protection | IP20 |
Dimensions & installation

Dimensions and units are shown as marked in the drawing.
PRODUCT SELECTION
Application
For signal and data lines matching the stated interface, operating voltage and transmission characteristics.
Specify the required voltage and configuration in your enquiry. Check the ratings for the selected model before installation.
Discuss your NTRJ45L-4LR requirements.
Send your required configuration, quantity and destination to our team.
sales@nontis.com
